CM2 MT2 SETUP DOWNLOAD V2.03 2019 VERSION
CM2 MTK V2.0 SETUP DOWNLOAD Cm2 MTk v2.03 Latest Setup v2.03 By Infinity-Box Chinese Miracle-2 Latest Setup Download
On This Support Site This software is mostly used to remove FRP lock or format, Flashing the MT2 CPU based mobile Mobile Phone.
To tease this software you need a USB dongle, this software will only work. This is a software that starts without any hassle and without any Internet registration (only one time registration) and works completely.
With this software you can remove FRP Lock of MT2 mobile phones without any danger. It is very easy to repair the IMEI number Only the IMEI number can be repaired by one click .Pattern lock can be read without deleting data. in CM2 MTK V2.03
cm2 MT2 setup 4 Tabs are provided in this software With the help of which you can choose the IC to flash or unlock the Any Android mobile Phones. You can fix any bad mobile by putting software such as Micromax Lava Intex Karbonn Spice and other CM2 MTK V2.03 based mobile phones. And the valuable function of this is that you also flash to file a factory file or bin. file.
It has the ability to read and write factory file (scatter file).
This software belongs CM2 MTK V2.03 to Infinity-Box and it is a very successful software, cm2 MT2 setup so many mobile phones can be corrected because it contains very useful modules. If your mobile phone’s IMEI number and baseband have been ununified, then you can fix your baseband with one click in it. The boot loader can also be repaired by writing a preloader file.
Keep in mind something important mtk v2.03 setup
Known issues/warnings/info: mtk v2.03 setup
1. [NAND on MT6570] v1712, v1736 loader packages SHOULD NOT BE USED due to these packages have ftl/ecc errors!
In result you will give read/write FW errors and rest problems at all.
Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
2. [NAND on MT6570] In some cases “stuck on logo” devices can be fixed only via FFU (whole flash) format!
3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal behaviour and can not be fixed.
Read-Write data, which you want, ignore “EMPTY” states.
4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result – stuck after system/userdata partition flashing
5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution – exclude them from flashing list.
6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases!
7. Meizu support is limited by Preloader Level ( No BROM SLA ) – you must UNTICK “PMT Update” and “PRELOADER” partition from flashing list!
8. [NAND on MT6570] In some cases device MAY DEAD after flashing! Make sure you have TESTED firmware version!
If you have download FW from internet/other source – make sure it preloader CONTAIN 3 EMI record! Preloader jc45btlc with 2 records KILL SOME DEVICE TO UNRECOVERABLE STATE!!!
– Smart-Card is a software configuration and protection unit
– Do not use any kind of remote/network sharing, port sniff/trace/analyze and similar software to avoid software conflicts !
– Any kind of Smart-Card remote/network sharing and/or protocol trace/sniff is strictly forbidden !
– Violation of usage rules may lead to Smart-Card misconfiguration !